Compra tus regletas y filtros eléctricos en AudioYcine , tu tienda en Sevilla y online para audio y cine en casa.
Tambien tenemos cables de corriente eléctrica , cables de altavoz, cables digitales, cables interconexión RCA, cables HDMI…

Mostrando los 5 resultados

taga-harmony-pf-600v2-filtro-regletataga-harmony-pf-600v2 silver-regleta-filtro

Taga PF-600V2 regleta filtro


Taga PF-600V2 regleta filtro es una gran manera de limitar los ruidos negativos de su electricidad y aislar su sistema de la energía contaminada.


Taga PF-1000V2 regleta filtro


Taga PF-1000V2 regleta filtro es una gran manera de limitar los ruidos negativos de su electricidad y aislar su sistema de la energía contaminada.

Taga Harmony PF-2000 (2019) filtroTaga Harmony PF-2000 (2019) filtro

Taga Harmony PF-2000 filtro


Taga Harmony PF-2000 (2019) filtro, electricidad limpia para mejorar el rendimiento y disfrutar de una mejor calidad de su sistema de audio y vídeo.


Oyaide MTS-4e


feature MTS-4e

# of outlets
OFC 2mm
Original SWD-XXX-E (24K gold + Palladium plating)
W 75 × H 53 × L 320
1.6mm stainless
Rated V/A
250V 10A AC

Dual-Spring vise structure for receptacles

The Dual-Spring vise structure is newly-developed for the contacts of our new outlet, SWD-XXX. Due to its strong holding power and 9mm wide contact area, the contacts tightly hold the inserted pins and reduce vibration at the contacts with no loss of signal transmission.


The chassis of MTS-4e is made of highly rigid stainless steel which is non-magnetic SUS 304. It protects from not only vibration but also electric-magnetic wave or external noise contermination. And all components, from 6.0mm thick contact down to stainless screws, are made of non-magnetic substance.

Audio grade solder

For the soldering connection, we employed SS-47 audio grade solder.
Compared to general solders which usually contain 3N (99.9%) pure tin, SS-47 contains 4N (99.993%) pure tin achieved by excluding impurities to the maximum. Furthermore, 4.7% silver and 1.7% copper are contained for the purpose of improvement of electric conductivity and durability.


The inlet is designed specially for MT series. The contacts are made of brass. The plating is a combination of silver (1.5μ) and rhodium (0.3μ). The body is made of 30%GF PBT.

Damping sheet

We adapted VEM 313 sheet (Visco Elastic Material) for damping material for the inside of the chassis.

internal wiring

For its internal wiring, we employed 2mm 4N OFC copper wire. And for its insulator, we employed low-dielectric polyorefin resin.

Brass spikes

For the better separation from the floor, we specially employed accurately machined brass spikes. Although it is set to four-point support as default, three point support is also applicable according to your preference.